Welcome

Zyxel gs1910-24hp.GS1910-24 and GS1920-24 losing configuration

 

Zyxel gs1910-24hp.ZyXEL Communications GS1910 User Manual

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Troubleshooting.Download Landing | ZyXEL

 

The GS, GSHP, XGS or XGS also has four GbE dual personality interfaces. A dual personality interface includes one Gigabit Ethernet port and one slot for a mini- GBIC transceiver (SFP module) with one port active at a time. The GS and GSHP have four SFP slots. Page 6: High Performance Switching Example. To acquire firmware, software, driver or other support files for Zyxel devices, enter the model number in the search box. Search by Model Number. Don’t know the product model number? How to Find Model Number. GSHP. 8/10/16/24/port GbE Smart Managed Switch. Related Article(s). Reminder: NBG To upgrade the firmware NBG V(ABMV.3)C0 or later, make sure to upgrade V(ABMV.2)C0 firmware in advance. GS Series.

 

Zyxel gs1910-24hp.GS Series 8/10/16/24/port GbE Smart Managed Switch | Zyxel

The GS, GSHP, XGS or XGS also has four GbE dual personality interfaces. A dual personality interface includes one Gigabit Ethernet port and one slot for a mini- GBIC transceiver (SFP module) with one port active at a time. The GS . Reminder: NBG To upgrade the firmware NBG V(ABMV.3)C0 or later, make sure to upgrade V(ABMV.2)C0 firmware in advance. GS Series. Zyxel GSHP – switch – 24 ports – managed overview and full product specs on CNET.
 
 
related:
24/48-port GbE Smart Managed Switch
Near silent operation
XGS/GS Series 24/port GbE Smart Managed Switch | Zyxel
Download Landing
GS1900 Series
Zyxel GSHP – switch – 24 ports – managed Specs – CNET

I think I have now tried everything I can think of to try and save the configuration. It makes no difference if I use config 1 or config 2. I have factory reset the device several times. Even just performing a reboot from the management console using either config 1 or config 2 to boot to makes the router lose the configuration completely.

And yes, the funny thing is, I have that old GSHP next to this router and it has exactly the same fault. I could of course source another used GS for a decent price but I feel hesitant to ever touch anything from this product family again Do you have any ideas? I got this sorted out, finally!

For reasons beyond my understanding, the switch only keeps configuration for “Config 1”. If set to boot “Config 2”, it always boots with factory default settings, despite having saved a modified “Config 2” via the “Maintenance” page. I originally only upgraded “Config 2” to most recent ROM version, as my idea was to leave “Config 1” intact, using an older version.

This was obviously not a good idea. I changed the router to boot “Config 1” instead and then reflashed it to most recent ROM. Both configs are now in the same version and “Config 1” is keeping the saved settings. All sorted out. Now it is time to start tinkering with the VLAN configs Hi Jouko. There is a configuration checking mechanism when the version gap between firmware image 1,2 is too big For example: image 1 is 4.

It looks like you’re new here. If you want to get involved, click on this button! GS and GS losing configuration. Jouko Posts: 3. November edited April 14 in Switch. I am mildly disappointed and slightly irritated. Some years ago, I purchased a used GS switch. Soon after purchase I realized that it worked perfectly except that it lost its configuration at every reboot. Back then it was not an issue for me, as I had nothing I needed to configure in it.

Stupid as I was, I purchased a used GS This one also works perfectly, except that it looses its setup at every reboot, too! This is incredible. Is this how your products are “programmed to behave” as they get older? Yes, I am pressing the separate “save config” button but it gets me nowhere. Nor is there any battery inside to replace I now have two routers “kind of” working The third that I may now need to buy will not be a Zyxel November When you press the Save button does the page show that the configuration has been saved?

November edited November Hi Jouko There is a configuration checking mechanism when the version gap between firmware image 1,2 is too big For example: image 1 is 4. So it’s better to keep both firmware as close or same trunk version to prevent the problem. Anyway, glad that you sorted it all out. Sign In to comment. Howdy, Stranger! Sign In Register.